I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Saturday, August 19, 2017

DJAMILA



Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Djamila" which you an find here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 19, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Pavillion Element - resize by 75%

Paste and position in the center of the canvas

Select Beads Element - resize by 40%

Paste and position on the top where desired

Select Dangle and Deangle 2 Elements - resize by 30%

Paste and position on the top where desired

Select Butterfly Element - resize by 40%

Paste and position on the top right

Select Butterfly 2 Element - resize by 30%

Paste and position on the top where desired

Select Pillows Element - resize by 50%

Paste and position on the bottom left

Select Caraff4 Element - resize by 30%

Paste and position on the bottom left

Select Flower 2 Element - resize by 25%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Pillows2 Element - resize by 40%

Paste and position on the bottom right

Select Flower Element - resize by 25%

Image mirror and paste on the bottom right

Select Greenery 2 Element - resize by 30%

Image Free Rotate Right by 15% and paste on the right side

Select Peacock Element - resize by 30%

Paste and position on the bottom

Select Deco 2 Element - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom

Select Pipe Element - resize by 30%

Paste and paste on the bottom

Select Pearls3 Element - resize by 30%

Paste and position on the bottom

Select Cat Element - resize by 30%

Paste and position on the bottom

Select Sparkles 4 Element - resize by 50%

Paste and position on the canvas where desired

Paste paper 1 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, August 17, 2017

ROSE




Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Rose" which you can get by going here

Mask 28 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 17, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3

Paste and position in the center of the canvas

Select Element 31 - resize by 72%

Paste and position in the center of the frame

Select Element 5 - resize by 75%

Paste and position in the center

Select Element 4 - resize by 45%

Paste and position on the right side

Select Element 100 - resize by 50%

Paste and position on the bottom left

Select your magic wand tool and select the center each circle (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste close-up tubes on paper layer and delete

Select none

Change the closeup to Hard Light and Luminance Legacy

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 18 - resize by 15%

Paste and position on the left side

Select Element 23 - resize by 15%

Paste and position on the bottom right

Select Element 43 - resize by 20%

Paste and position on the bottom right

Select Element 108 - resize by 20%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 15%

Paste and position on the bottom right

Select Element 56 - resize by 20%

Paste and position on the bottom

Select Element 75 - resize by 15%

Paste and position on the bottom

Select Element 40 - resize by 25%

Paste and position on the bottom

Select Element 34 - resize by 20%

Paste and paste on the bottom

Select Element 122 - resize by 12%

Paste and position on the bottom

Select Element 95 - resize by 15%

Paste and position on the bottom

Select Element 131 - resize by 15%

Paste and position on the bottom

Select Element 39 - resize by 25%

Paste and position in the center where desired

Select Element 99 - resize by 15%

Paste and position on the bottom right

Paste paper 12 on the canvas

Apply Mask 28 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, August 13, 2017

PECADO



Supplies needed:

I am using the stunning artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Pecado Original" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 13, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 31 - resize by 45%

Paste and position in the center of the canvas

Select Frame Element 64 - resize by 45%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Element 30 - resize by 75%

Paste and position in the center above the frame

Select Element 8 - resize by 20%

Paste and position in the center towards the right

Select Element 96 - resize by 40%

Paste and position on the top

Select Element 70 - resize by 50%

Paste and position in the center towards the bottom

Select Element 111 - resize by 25%

Paste and position on the left side

Select Element 37 - resize by 15%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 123 - resize by 20%

Paste and position on the right side

Select Element 9 - resize by 30%

Paste and position on the bottom right

Select Element 22 - resize by 20%

Paste and position on the bottom right

Select Element 66 - resize by 20%

Paste and position on the bottom right

Select Element 112 - resize by 20%

Paste and position on the bottom left

Select Element 99 - resize by 25%

Paste and paste on the bottom left

Select Element 69 - resize by 20%

Paste and position on the bottom left

Select Element 27 - resize by 25%

Paste and position on the bottom

Select Element 48 - resize by 25%

Paste and position on the bottom

Select Element 119 - resize by 20%

Paste and position on the right side

Select Element 7 - resize by 75%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, August 12, 2017

VOODOO DOLL







These Extra's were made using the amazing artwork by Lady Mishka and stunning kit by Bibi's Collections  called "Sugar Skull". You can purchase the kit here and the tube here
These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Friday, August 11, 2017

SUMMER HAPPINESS



Supplies needed:

I am using the stunning artwork from Toriya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designs by Joan called "Happiness" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 11, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 20 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change the closeup to Hard Light

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 28 - resize by 40%

Image mirro and flip and paste on the top left of the frame

Select Element 45 - resize by 22%

Paste and position on the top left

Select Element 10 - resize by 40%

Paste and position on the top

Apply Eyecandy Gradient Glow on fat default settings (glow width 3)

Select Element 65 - resize by 40%

Image mirror, Free Rotate Left by 15% and paste on the left side

Select Element 2 - resize by 65%

Paste and position on the bottom

Select Element 9 - resize by 30%

Paste and position on the bottom right

Select Element 22 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 33 - resize by 30%

Paste and position on the bottom right

Select Element 11 - resize by 15%

Paste and position on the bottom right

Select Element 59 - resize by 20%

Paste and position on the bottom

Select Element 44 - resize by 15%

Paste and position on the bottom

Select Element 60 - resize by 20%

Paste and position on the bottom

Select Element 66 - resize by 25%

Paste and paste on the bottom below tube layer

Select Element 34 - resize by 20%

Paste and position on the bottom

Select Element 14 - resize by 25%

Paste and position on the bottom

Select Element 71 - resize by 30%

Paste and position on the canvas where desired

Paste paper 1 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, August 8, 2017

DELICIOUS GLAMOUR



Supplies needed:

I am using the stunning artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Delicious Glamour" which you can get by going here

Mask 26 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 8, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on the left side of the paper layer and delete

Select none

Chage the closeup to Hard Light and drop opacity down to 70%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Leaf 3 Element - resize by 30%

Image mirror Paste and position on the top left

Select Deco 2 Element - resize by 30%

Paste and position on the top left

Select WA2 Element - resize by 40%

Paste and position on the top of the frame

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Butterfly Element - resize by 40%

Paste and position on the top left

Select Box Element - resize by 40%

Paste and position on the bottom right

Select Radio Element - resize by 30%

Paste and position on the bottom left

Select Car Element - resize by 35%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Flower 4 Element - resize by 30%

Paste and position on the bottom right

Select Charm Element - resize by 40%

Paste and position on the bottom

Select Pillow 2 Element - resize by 30%

Paste and position on the bottom

Select Lipstick 2 Element - resize by 40%

Paste and position on the bottom

Select Phone Element - resize by 30%

Paste and position on the bottom

Select Flower 10 Element - resize by 30%

Paste and position on the bottom

Select Polish Element - resize by 40%

Paste and paste on the bottom

Select Brush Element - resize by 30%

Paste and position on the bottom

Select Bottle Element - resize by 25%

Paste and position on the bottom

Select Cat Element - resize by 30%

Paste and position on the bottom left

Paste paper 13 on the canvas

Apply Mask 26 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, August 7, 2017

SEA PIRATE



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Lil Mz Brainstorm called "Undead Pirate Sea" which you can get by going here

Mask 4 from Rachel Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 7, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 90

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete, select none

Move paper layer below frame layer

Select Element 19 - resize by 75%

Paste and position on the left side

Select Element 118 - resize by 25%

Paste and position on the top left

Select Element 55 - resize by 40%

Paste and position on the bottom right

Select Element 105 - resize by 40%

Paste and position on the top right

Select Element 16 - resize by 45%

Paste and position on the right side

Select Element 70 - resize by 80%

Paste and position on the bottom

Select Element 63 -

Paste and position on the bottom

Select Element 104 - resize by 40%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 120 - resize by 30%

Paste and position on the left side

Select Element 11 - resize by 15%

Paste and position on the bottom left

Select Element 93 - resize by 20%

Paste and position on the bottom left

Select Element 15 - resize by 20%

Paste and position on the bottom

Select Element 81 - resize by 30%

Paste and position on the bottom right

Select Element 64 - resize by 25%

Paste and paste on the bottom

Select Element 73 - resize by 25%

Paste and position on the bottom right

Paste paper 2 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif